Inventor Exact Positioning Of Section Line In The Idw Source View For Section View Inventor

Inventor Exact Positioning Of Section Line In The Idw Source View For Section View Inventor When selecting the source view in the inventor idw and dwg file. you want to locate the section line by an exact dimension value from the view edge. if the section line is not dimensioned or constrained in the sketch it can be moved be accident. create the section line in the base or source view. you will see a "sketch" appear underneath it edit the sketch; then constrain or dimension the line. Rmb on the section line, select edit, this take you into the idw sketch environment, very similar to the ipt sketch environment, using the same methods as you would in the ipt environment create a line the exact dimensioned distance required, then you can use the constraints to achieve the alignment & dimensions to achieve the exact section.

Inventor Tutorial Section Views In Parts And Assemblies 1 Of 3 Youtube On the ribbon, click place views tab create panel section . select the view cutting line you defined in the sketch. (optional) specify the appearance of the view in the section view dialog box. for a section view defined by sketch geometry: edit the view identifier and select the scale. In inventor you model parts. then all else is derived from the parts. the drawing views are derived from the part that is where you create your section (and all other 2d) views. section views created from the view tab are for visual purposes only. if you have prior experience with creo (pro e) inventor works differently. In reply to: anonymous. 11 10 2004 09:58 am. right click on the section line and choose "edit" now you can project edges and dim constrain it to exactly where you want it. brian "joemang" wrote in message news:[email protected] > i am having problems moving the section line. Taken from #cadline community blogsfor more videos, visit cadline community at cadlinecommunity.co.uk.

Inventor Detail View Moves After Placement On Idw In reply to: anonymous. 11 10 2004 09:58 am. right click on the section line and choose "edit" now you can project edges and dim constrain it to exactly where you want it. brian "joemang" wrote in message news:[email protected] > i am having problems moving the section line. Taken from #cadline community blogsfor more videos, visit cadline community at cadlinecommunity.co.uk. Read additional tips available at ketiv blog jonathan landeros of ketiv technolgies shows how dimensions can be used to position a section line in. Placing the section line "off the geometry". now with the view placed (it looks like a projected view right now), right click on the section line, and choose "edit". '. the section view completed off the geometry. now to edit the placed view. now the sketch the section line lives on becomes active, and it can be positioned using constraints and.